Home/Knowledge/Ginseng extract specifications
Technical

How to read a ginseng extract specification, line by line

What we settle before a ginseng extract specification sheet goes out. Most ginseng extract enquiries arrive with a competitor sheet quoting a single percentage, so the first thing we establish is the assay basis: total ginsenosides 5% / 10% / 20% / 80%, measured by UV or HPLC, because a sheet written on a different method cannot be compared with ours line by line. We then ask which application the powder is going into, since energy drinks and ginseng teas pull the water-soluble grades forward while capsules and tablets are less demanding on solubility, and we confirm whether the formulator needs the Rg1 + Rb1 ratio declared on the sheet. We also ask our GMP-audited manufacturing partner for the most recent lot COA to send alongside the sheet: the sheet states limits, the COA states results. If the buyer needs an alternative assay or mesh size, we confirm feasibility and lead time within one business day rather than quoting blind.

Ginseng extract is one of the most widely quoted categories in the botanical market, and also one of the easiest to mis-compare, because sheets that all say “ginsenosides” can be written against different assay methods, different root ages and different ratio declarations. This article reads the ginseng extract specification in the order that matters: what the source and process lines tell you, what the assay and physical lines actually commit to, and what the batch COA adds on top. The commercial side — how quotations are compared and what a first order looks like — is covered in our ginseng extract sourcing guide.

What the source and process lines tell you

The botanical line reads Panax ginseng C.A.Meyer, the part-used line reads root, and the process line reads water / ethanol-water extraction. Two details matter more than they look. First, root age: the material is made from cultivated 4–6-year roots, and that is the line behind assay consistency, because ginsenoside content drifts with root age and a supplier who does not state it cannot promise the same number lot after lot. Second, the process line: water and ethanol-water extraction is what separates a true extract from plain root powder, and it is why the material is available in both white and brown grades — the white grades being the more refined, water-soluble versions that beverage work usually needs.

The assay line: what total ginsenosides commits to

The assay line states total ginsenosides 5% / 10% / 20% / 80%. That range covers almost every enquiry we see: the 5% and 10% grades go into multibotanical blends and food formats, the 20% grade is the classic supplement strength, and the 80% grade is for concentrated formats. Each figure is measured by UV or HPLC, and the method matters: a sheet that reads “80% ginsenosides” without naming the method and a sheet that reads the same number by HPLC are not the same material, so the first question to any ginseng extract supplier is which method the percentage is measured by. For formulators who need it, Rg1 + Rb1 ratio declarations are available, which is what lets a finished-product label state a ratio rather than a total alone.

The assay line is a commitment, not a result. The sheet states what the grade commits to; the batch COA states what the lot tested.

The physical lines: appearance, mesh and loss on drying

Three physical lines decide whether the powder works in your process:

  • Appearance. White to light-yellow fine powder. The difference between the white and brown grades is visible at a glance, so this is the first check against the sample.
  • Particle size. 80 mesh as standard. The standard grade blends into dry formulas without a separate milling stage; alternative mesh sizes can be produced to your specification.
  • Loss on drying. Limited to 5.0% or less. This is the free-moisture line, and it is the one that matters most for shelf life in unopened packing.

Packing, shelf life and what the batch COA adds

LineStandard grade
Packing25 kg fibre drum, double polyethylene liner
Sample and pilot packing1 kg and 5 kg foil bags
Shelf life24 months unopened
StorageCool, dry
MOQ1 kg

Every lot ships with a batch COA and full documentation. On a recent production lot the COA read 24.6% total ginsenosides by UV, loss on drying 4.4%, lead below 1 ppm, total plate count below 1,000 cfu/g, and E. coli and Salmonella negative — indicative values for a standard lot, with the actual COA issued with the shipment. The sheet states limits; the COA states results, and on a marginal lot those are two different documents — which is why we ask buyers to compare the lot COA that would ship with their order rather than a generic sample. When two ginseng extract specifications land side by side, the lot COA is the document that settles which sheet describes the material you would actually receive.

How we read a ginseng extract specification against a quotation

When a buyer sends us a competitor sheet, we read four things in this order: the assay method, the root age, the Rg1 + Rb1 ratio line, and the documentation offered. Where the competitor sheet quotes a single percentage without naming UV or HPLC, we ask for the lot COA behind it. Where the root age is unstated, we treat assay drift as a live risk and say so before prices are compared. And where the buyer needs OEM packing under their own brand, we treat that as drum and label work, not as a change to the powder. The applications the powder is bought for — energy and focus stacks, immune-support blends, sports nutrition formulas, energy drinks and ginseng teas — are covered in our ginseng extract applications breakdown.

Frequently asked questions

What is ginseng extract standardised to?
The standard grades are total ginsenosides 5% / 10% / 20% / 80%, measured by UV or HPLC, from cultivated 4-6-year Panax ginseng C.A.Meyer roots extracted with water or ethanol-water. The powder is white to light-yellow and fine, at 80 mesh, with loss on drying limited to 5.0% or less. Rg1 + Rb1 ratio declarations are available for formulators, and the material is supplied in white and brown grades.

What should I check when comparing ginseng extract specifications?
Check the assay basis first: total ginsenosides 5% / 10% / 20% / 80% stated explicitly, and ask whether the figure is measured by UV or HPLC, because sheets written on different methods cannot be compared line by line. Then the root age (cultivated 4-6-year roots), the Rg1 + Rb1 ratio line if your formula needs one, the physical limits (80 mesh, loss on drying at 5.0% or less), and the documentation: ask each supplier for the lot COA that would ship with your order rather than a generic sample.

What packing and shelf life does ginseng extract come in?
Standard packing is a 25 kg fibre drum with a double polyethylene liner, with 1 kg and 5 kg foil bags for samples and pilot runs. Shelf life is 24 months unopened, stored cool and dry. MOQ is 1 kg, and every lot ships with a batch COA.

Related reading

Related: Ginseng Extract (Ginsenoside) — full specification, grades and documentation.

About the author

Written by Hunter Liu, authorized export sales representative at Xi'an Yuanqingyuan Technology Co., Ltd. (export brand BotanicExtract), Xi'an, Shaanxi. We supply specification-controlled botanical extracts and peptide ingredients to buyers in the U.S. dietary supplement and natural health market. How we work.

WhatsAppEmail usContact page